Detachable Faux Fur Coat Collar DIY

Detachable Fur Coat Collar DIY abeautifulmess.com        I feel like lately it's harder and harder finding things to be grateful for when you hit that midway-through-winter stride here in the midwest. Actually, I'm not big on winter in general (I hate being cold) but I always try and focus on two things that I do look forward to when the temperature drops: cool coats and pretty boots. Coats and jackets can be so much fun to shop for, but sometimes a coat needs a little bit of something to make it an extra-special piece—that's where a detachable fur collar comes in!Detachable Fur Coat Collar DIY abeautifulmess.com Supplies: Coat, faux fur, white cotton fabric, elastic (1/8" wide), buttons, fabric scissors.Detachable Fur Coat Collar DIY abeautifulmess.com1. Start with a coat that has simple symmetrical collar (put it on a dress form if you can find one, it will help a lot!) 2. To make your pattern, lay a piece of white cotton fabric over your coat. Smooth and pin the fabric on the back neck area of the coat. Starting at the back, continue to smooth the fabric towards the front and pin the loosely to the collar as you go. You should have a bunch of extra fabric in the open space between the collar when you're done. 3. On the inside of the jacket, pin the fabric to the inside about an inch from the collar edge. Trim down the extra on the sides and in the middle between the collar so you can better start to choose you fur collar shape. 4. Trim the fabric on the inside of the coat to just beyond your marked pins. Continue to mark with pins how wide you want your collar to be on the outside and trim your pattern down to that size. I did end up pinning two darts in my pattern on the back of the coat collar (each about two inches from the center of the neck). This helped the round the pattern a little more where needed. You can see that I made my fur collar pattern bigger and a different shape from the original collar. You can really make it any size and shape as long as it covers the collar underneath. 5. Remove your collar pattern and face it upside down onto the back of your fur. Trace the pattern with a marker. 6. Use fabric scissors to cut out your pattern. When cutting fur-like material, you want to keep your scissor's edge as close to the base of the furry side of the material as possible. This helps you to cut the base fabric rather than the long fur hairs. Make small cuts and slide your scissor blade along the bottom of the fabric as you go. 7. Once your fur collar is cut, make small loops with your elastic and attach them to the inside curve of your collar every four inches or so (facing out past the edge of the collar). You want the loops to be big enough to go over your button size, but small enough that they won't come off by themselves. 8. Pin the fur collar in place and sew a button at each spot on the inside of the coat where an elastic loop hits the coat. Once the buttons are sewn in, attach the loops to the buttons and you're done!Detachable Fur Coat Collar DIY abeautifulmess.com     Detachable Fur Coat Collar DIY abeautifulmess.com         Detachable Fur Coat Collar DIY abeautifulmess.com       Detachable Fur Coat Collar DIY abeautifulmess.com      I think this collar was just what this coat needed to gain a little "ommph." And, the great thing is, you can leave it on or take it off depending on what outfit you're wearing or what mood you're in. Or, you can always make several different collars, and it would look like you're wearing a new coat everytime! Think your current coat is too boring and should be pitched? FUR-get about it, make yourself a detachable collar for a coat makeover instead! xo. Laura

Credits // Author and Photography: Laura Gummerman

Comments

Thanks for commenting! Comments are moderated (everything constructive is approved), so they may take a bit to appear. We reply to comments daily, so please check back!

The Shop

Check out our Photoshop Actions, E-Courses, Workshops and Crash Courses!

Browse by Category